APVC composite tile fittings

Product features:

First, excellent corrosion resistance

APVC anticorrosive composite tiles can resist the corrosion of various chemicals such as acid, alkali, salt and so on for a long time. The experimental results show that there is no chemical reaction when soaked in salt, alkali and various acids below 60% for 24 hours. Very suitable for acid rain-prone areas, corrosive factories and coastal areas, the effect is more remarkable!

Second, excellent weather resistance

The surface of APVC anticorrosive composite tile is co-extruded with super weathering resin to ensure the durability of the product (provide 15-year quality assurance)

Third, the sound insulation effect is good

It is proved by test that APVC anticorrosive composite tile has a good effect of absorbing noise under the influence of external noise such as rainstorm and strong wind, which is more than 20dB lower than that of colored steel plate.

Fourth, excellent thermal insulation performance

The thermal conductivity of APVC anticorrosion composite tile is 0.325w/m.k, which is about 310 of clay tile and 0.5mm thick color steel tile of cement tile. Therefore, without considering the addition of insulation layer, the thermal insulation performance of APVC anticorrosion composite tile can still achieve the best.

Fifth, excellent anti-load

APVC anticorrosion composite tile has good bearing capacity. In areas with lower temperatures, even if the roof is covered with snow all the year round, the anticorrosive composite tiles will not cause surface damage and fracture. After testing, the 2.0mm anticorrosive composite tile will not produce cracks and damage when loading 100kg in the case of support spacing 800mm.

Sixth, excellent waterproof performance

The high weathering resin selected by APVC anticorrosive composite tile is compact and does not absorb water, and there is no problem of microporous water seepage. With special waterproof fittings, the problem of water seepage of screw hole is solved completely.

Seventh, anti-impact, good low temperature resistance

APVC anticorrosive composite tile has strong external impact bearing capacity. Through the test, the free fall of 1 kg steel ball from 3 meters high will not produce cracks, and the impact resistance at low temperature is also very remarkable.

Eighth, excellent insulation performance

APVC anticorrosive composite tile is an insulating product, which will be intact in case of unexpected discharge. In particular, the safety of replacing metal tiles in thunder-prone areas and near high-voltage lines is more secure.

Ninth, green environmental protection

APVC anticorrosive composite tile does not contain asbestos and radioactive elements, and can be recycled, which is fully in line with the requirements of green environmental protection.

Tenth, quick installation

APVC anticorrosion composite tile has the advantages of light weight, complete installation accessories and easy installation, so the paving efficiency is high.

Structural characteristics of APVC anticorrosive composite tiles

With special accessories, waterproof, wind resistance and corrosion resistance are improved by three grades. The structure adopts a full seal of the screw head, thereby solving the corrosion of the screw head, the aging of the waterproof rubber ring and the leakage of the screw hole; there is a waterproof rubber ring under the pressing sheet, which can prevent the tile surface water from infiltrating into the screw hole; the fixed position of the screw is enlarged, and it has the function of resisting typhoon.