Matters needing attention in the installation of plastic steel tiles

1. Construction safety. Tiles are installed on the roof, and it is best to use standard facilities such as ladders during construction, rather than trampling on purlins. The load-bearing capacity of purlin is not very strong, so it is very prone to stampede accidents.

2. In the weather of too low temperature or wet rain and snow, tile construction can not be carried out, so as not to affect the effect of installation, or people slip in the process of construction, causing people's physical damage.

3. The installation of plastic steel tile can not be directly installed on the thermal insulation material, so as to avoid damage to the plastic steel tile and reduce its service life.

4. the plastic steel tile should be cut with a circular fine tooth saw, which can ensure the overall aesthetics of the plastic steel tile and will not cause damage to the plastic steel tile.

Performance of plastic steel tile

1. Corrosion resistance

Plastic steel tile material components are not with acid, alkali, salt and other chemical reactions, in the long-term use process, there is no possibility of corrosion, so the product can maintain excellent physical properties.

2. Weather resistance

The use of high-quality PVC resin as the substrate, adding UV ultraviolet absorbers, antioxidants, modifiers, etc., to ensure the service life of the product. Even if it is exposed to ultraviolet light, moisture, heat, cold and other natural environment for a long time, it can still maintain its stability and ensure the long-term safe use of the product.

3. Load resistance

Using the advanced two-layer attack technology in the industry, it has higher mechanical strength and physical performance than the ordinary single-layer tile. The test of the National Chemical testing Center shows that the weight is 1500N and the deflection ≤ is 3% under 1.2m purlin spacing.

4. Fire performance

The plastic steel tile has been tested by the National Chemical testing Center, the fire performance grade is non-flammable B1, and all factories that emphasize fire safety regulations are applicable, which is a safe and environmentally friendly roofing material recommended by the National Building Materials Promotion Association.

5. Thermal insulation performance

The thermal conductivity of plastic steel tile is 0.22, which is about 1 beat 3 of clay tile and 1 hammer 2000 of 0.5mm thick color steel tile, so without any thermal insulation and cooling facilities, the thermal insulation performance of plastic steel tile can still reach the best, which can fully meet the demand.

6. Performance of sound insulation and noise reduction

Plastic steel tiles can effectively block the noise caused by natural factors such as rain and wind.

Matters needing attention in the installation of plastic steel tiles

1. Construction safety. Tiles are installed on the roof, and it is best to use standard facilities such as ladders during construction, rather than trampling on purlins. The load-bearing capacity of purlin is not very strong, so it is very prone to stampede accidents.

2. In the weather of too low temperature or wet rain and snow, tile construction can not be carried out, so as not to affect the effect of installation, or people slip in the process of construction, causing people's physical damage.

3. The installation of plastic steel tile can not be directly installed on the thermal insulation material, so as to avoid damage to the plastic steel tile and reduce its service life.

4. the plastic steel tile should be cut with a circular fine tooth saw, which can ensure the overall aesthetics of the plastic steel tile and will not cause damage to the plastic steel tile.

Performance of plastic steel tile

1. Corrosion resistance

Plastic steel tile material components are not with acid, alkali, salt and other chemical reactions, in the long-term use process, there is no possibility of corrosion, so the product can maintain excellent physical properties.

2. Weather resistance

The use of high-quality PVC resin as the substrate, adding UV ultraviolet absorbers, antioxidants, modifiers, etc., to ensure the service life of the product. Even if it is exposed to ultraviolet light, moisture, heat, cold and other natural environment for a long time, it can still maintain its stability and ensure the long-term safe use of the product.

3. Load resistance

Using the advanced two-layer attack technology in the industry, it has higher mechanical strength and physical performance than the ordinary single-layer tile. The test of the National Chemical testing Center shows that the weight is 1500N and the deflection ≤ is 3% under 1.2m purlin spacing.

4. Fire performance

The plastic steel tile has been tested by the National Chemical testing Center, the fire performance grade is non-flammable B1, and all factories that emphasize fire safety regulations are applicable, which is a safe and environmentally friendly roofing material recommended by the National Building Materials Promotion Association.

5. Thermal insulation performance

The thermal conductivity of plastic steel tile is 0.22, which is about 1 beat 3 of clay tile and 1 hammer 2000 of 0.5mm thick color steel tile, so without any thermal insulation and cooling facilities, the thermal insulation performance of plastic steel tile can still reach the best, which can fully meet the demand.

6. Performance of sound insulation and noise reduction

Plastic steel tiles can effectively block the noise caused by natural factors such as rain and wind.