Shaoguan resin tile factoryAccording to the company, the roof of the house protects us from wind and rain, and waterproof treatment is particularly important during construction. Waterproof is waterproof treatment at the intersection of wall and roof, that is, at the intersection of all flat elevations requiring waterproof treatment.Shaoguan resin tile factoryIn the process of resin tile roofing system construction, what details need to be paid attention to when waterproofing the roof nodes?
I. Skylight flooding treatment
Before installing the resin tile, fix the metal plates on both sides of the skylight and on the uphill to the roof. After installing the resin tile on the downhill of the skylight, cover the metal drainage plate on the resin tile.
II. House chimney treatment
Chimney and resin tile are intersected on all sides, which can be divided into positive flooding and bending flooding. Flooding on the front side means that the resin tile is located on the inclined slope of the structure. The metal plate can be customized according to the site size. The lower end is fixed under the waist of the structure and the upper end is fixed on the purlin under the resin tile.
III. Drainage treatment around the tiger window
There is also a more important place is the drainage treatment around the dormer window, drainage grooves should be set on both sides above the dormer window, and the installation construction should be handled according to the gable, water tank and chimney flooding method;
IV. Cornice Treatment
The eaves and eaves of the house shall be properly drained, and the eaves board below shall be protected at the same time. Metal drip board or synthetic resin eaves board shall be selected for the cornice position, and the cornice shall be covered by bending downward from the edge of the roof for 100 mm.